Pressure-Reducing Valves: How They Work and Fail

A pressure-reducing valve (PRV) is a bell-shaped brass valve, usually found just after the main shut-off and meter. It lowers incoming municipal pressure to a level that is safe for your plumbing.
How it works
Inside is a spring and diaphragm. Incoming pressure pushes against the diaphragm, and the spring tension sets the outgoing pressure. Turning the adjustment screw changes the spring tension.
Why it matters
Very high pressure stresses pipes, fittings, toilets, faucets, water heaters and appliances.
Signs of a failing PRV
• Pressure creeping higher over time
• Sudden drops in pressure
• Banging pipes
• Toilets that run briefly on their own
• A dripping relief valve on the water heater
• Fluctuating pressure at fixtures
Checking your pressure
A simple gauge on an outdoor tap or laundry tap gives a reading. Check it at different times of day.
Adjusting
Small adjustments can be made at the valve, but if the valve is old or the pressure will not hold, replacement is usually needed.
Thermal expansion
A PRV can create a closed system, which means an expansion tank at the water heater may be required.
Learn more about water pressure solutions.
Comments